Welcome to the Ceramist's Corner.

This new item is meant to fill the several demands of a more specific market. It will be possible to find here all equipment and accessories specially produced for schools, studios, potters, labs., etc. The equipment offered is divided in six distinct categories. Hence this is not an exhausting list of all our scope of supplies, for a different type of equipment, do contact us.


Studio Electric Kilns: EBH and EBV


EBH - 70


EBV - 50 / 70

Kilns Constuction
Mild steel casing in steel sheets 1,5mm thickness.
Insulation
1 - Low density high alumina insulation bricks.
2 - Low density ceramic fibre blocks combined with insulating bricks.
Heating System
Electrically heated with KANTHAL A1 elements
Temperature Control

Control panel, equipped with an electronic temperature programmer with 4 programs. The specific design of these kilns, with excellent insulation and power rating, results in:

 - Low energy consumption in relation to the firing capacity
 - Very fast firing cycles when necessary
 - Uniform temperature distribution throughout the firing load
 - Very low thermal mass
Technical Details
o Maximum Temperature Capacity

Useful Area

Overall Dimensions

Power Phase Supply Required
Type (ºC) (Lts)
L1 C1 A1
L C A
(KW) (A) (volts)
EBV 50 1200 50
370 370 370
580 660 635
3,5 16 220 V + N
EBV 70 1200 70
400 400 460
600 680 670
3,5 16 220 V + N
EBH 70 1200 70
350 460 460
560 750 730
3,5 16 220 V + N


Studio Electric Kilns:


EB 20

EB 50


EB 160 / 220


MEC 85

Kiln Construction
Mild steel casing in steel sheets 2,5mm thickness.
Insulation ( 2 options)
1 - Low density high alumina insulation bricks.
2 - Low density ceramic fibre blocks combined with insulating bricks.
Heating System
Electrically heated with KANTHAL A1 elements. In the case of fibre lined kilns, the elements are supported by high alumina refractory tubes.
Temperature Control

Control panel, equipped with an electronic temperature programmer with 8 programs and 8 steps. The specific design of these kilns, with excellent insulation and power rating, results in: :

 - Low energy consumption in relation to the firing capacity
 - Very fast firing cycles when necessary
 - Uniform temperature distribution throughout the firing load
 - Very low thermal mass
Technical Details
o Maximum Temperature Setting Capacity

Useful Area

Overall Dimensions

Power Phase Supply Required
Type (ºC) (Lts)
L1 F1 H1
L F H
(KW) (A) (volts)
EB 20 1200/1300 20
250 250 330
600 680 900
3 13,5 220
EB 50 1200/1300 50
340 380 460
730 930 960
6 9/Phase 3x220 + N
MEC 85 1200/1300 85
380 580 420
760 1190 1480
7,5 11,5/Phase 3x220 + N
EB 160 1200/1300 160
450 570 650
950 1170 1087
16 / 21 24-32/Phase 3x220 + N
EB 220 1200/1300 220
500 690 650
1000 1270 1087
16 / 21 24-32/Phase 3x220 + N


NOTE:
-
The external dimensions are only for 1300 °C. As request, any other size can be built.
. - Support for EB 20 and EB 50 is supplied as an option.


Equipment


For other complementary information, please send an e-mail to


info@fornoceramica.pt

Please add the following information:
- Name, Company, E-mail, Telephone, Adress

 

 

Netliz © 2002

| Profile | Kilns | News | Contacts | Ceramist´s Corner | 2nd hand kilns |